 | Low Mount Body |
| 0.50 FRP Sidewall, Front and Rear Walls |
| Radius Front/Rounded Corners |
| I.C.C. Lights and Reflectors |
| Dome Light with Interior Switch |
| 2" x 6" Shiplap Dense Pine Floor (33-1/2" Ground Height) |
| Fully Undercoated |
| Hat Section Steel Crossmembers on 16" Centers |
| Full Width Grip Strut Step Bumper with 12" Step (Approx. 18" Ground
Height) |
| Full Cab Cut Out (Enabling Full Cab Seat Travel and Recline) |
| Vertical and Horizontal Exterior Storage Compartments (Six on 10' Models,
Eight on 12' Models) |
| Recessed Stainless Steel, Non-corrosive Door Handles with Two Point
Locking |
| Aluminum Hinges with Grease Zerks on all Doors and Hatches |
| Two Rear Swing Doors with 49" x 64" Door Opening |
| 49" of Walk Space Between Interior Compartments |
| 0.030 Aluminum One Piece Roof |
| Mud Flaps |
| Interior Compartment Enclosure Working Height 36" |
| Easy Operating Bulkhead Door, 30" x 43" for Radius with Cast Corner Model;
Door is Equipped with a Mechanical Latch with Cab Side Locking |
| Rear Swinging Hatch Door for Easy Access |
| Low Mount Rear 12" Grip Strut Bumper for Easy Entry to the Body |
| Removeable H.D. Rear Access Ladder |
| Two Side Compartments Over the Wheels Equipped with Adjustable Tray and
Work Bench |
| Two Vertical Compartments, One Front and Rear on a 12' Body; One Vertical
Front Compartment on a 10' Body; Equipped with Spring Loaded Door Checks and
Adjustable Shelves |
| Cargo Dome Lights: Multiple Dome Lights, 3-way Cab Switch, Lighted Dome
Light Switch |
| Cabover with Radius Front |
| Translucent Roof |
| Exterior and Interior Shelving Packages |
| Aluminum Ladder Racks |
| Floor Overlays:
 | Aluminum Tread Plate |
| Sprayed Lining |
|
%20002.jpg)
